|
PERMA ANCHORFIX
HIGH STRENGTH THIXOTROPIC POLYESTER GROUT Description Perma Anchor Fix- 80 is a polyester resin based grout which is used in locations where very high early and ultimate strengths are required along with chemical resistance properties. The product is supplied in pre measured two component units. Primary uses Anchor Fix- 80 is used for installation of dowel bars in concrete and for providing starter bars in RCC structures for continuation structural concrete or in extension of structural members. Anchor Fix- 80 can be used for fixing foundation bolts, base plates and rail tracks. Because of its thixotropic nature the product is successfully used in vertical horizontal as well as in over- head applications. Direction for use
- Drill the holes for anchor with hammer drills so that holes with rough internal surface are obtained.
- Clean the holes to be grouted with compressed air so that the holes are free from any loose ground material, which could affect the bond of the surface with the grout.
- Mix the two components of Anchor Fix- 80 thoroughly to obtain, an uniform consistency smooth paste.
- Fill the hole with this paste taking care to see that the hole is filled effectively from the bottom to avoid any entrapped air in the hole.
- Insert the dowel rod, anchor or bolt in the filled hole and hold it in position till it has become firm.
- Tool the mouth of the hole to make an even and smooth surface.
Properties
|
Product
|
Two component
|
|
Liquid
|
Straw colored resinous liquid
|
|
Powder
|
Free flowing white powder
|
|
Flash Point of the liquid
|
290C
|
|
Application temperature
|
50C to 400C
|
|
Service temperature
|
-200C to 600C
|
Get Time
|
Ambient Temperature 0C
|
Get time Mins
|
Min time Before loading Hrs
|
|
20
|
15
|
7
|
|
30
|
5
|
4
|
|
40
|
3
|
3
|
Compressive Strength
|
In 4 Hours
|
20 N/mm2
|
|
In 24 Hours
|
50 N/mm2
|
|
After 7 days
|
90 N/mm2
|
|
Tensile strength
|
30 N/ mm2
|
|
