Description

Surface Preparation

Surfaces to be treated with Perma Shield should be clean free from oil, grease and loose particles. All laitence and loose particles should be removed by wire brushing or mechanical scabbling. All undulation and cracks should be made good using Perma Crack fill or Perma Rapid Repair systems.

Directions For Use

 

• Seepages and dampness through walls.
  • Remove the entire plaster.
  • Apply one coat of plaster and cure it for 7days.
  • Apply one coat of Barrier coat and immediately complete the second coat of plaster and cure normally.
    
    
• Leakage from sunk slabs of toilets.
  • Stop the use of upper floor toilet till the dripping  stops.
  • Remove the plaster or scrape the concrete. If  the surface to be applied is concrete only which is sound then use the surface directly.
  • Apply two Barrier coats and plaster the surface immediately.
    
    
• Terrace water proofing
  • On the prepared terrace surface apply two Barrier coat or one Barrier coat followed by Plaster or IPS.
    
    
• For protection of exposed reinforcing steel.
  • Clean the rods and apply two Barrier coats.

   

Packing
Perma Shield is supplied in 1 litre and 20 Litres containers.

Primary Uses

 

• For waterproofing terraces.
• For arresting rising dampness.
• For protection of exposed reinforcing steel rods.
• For water proofing leakages from toilet units and sunk slabs.
• For water proofing damp walls.

 Properties

Shelf Life
Two years if kept sealed in original packing in cool and dry place.